Printing presses for linocuts, woodcuts and etchings are offered in solid design with a sturdy cast aluminium frame. Upper and lower roller with a large diameter of 80mm. The contact pressure can be adjusted on both sides via star handles. Printing table or pressure plate, is moved between the rollers by means of friction. Manufactured from plywood with screwed-on, electrolytically galvanized steel plate. Specially coated strips on the side panels ensure friction-minimized guidance. Driven by a handwheel equipped with four handles directly onto the lower roller.
New: The presses can be easily upgraded with an extra available planetary reduction gear unit.
Compressive force: approx. 1.000 kg, Cleatrance Height approx. 24 mm (up to 40 mmon special request)
Art. No.: 17030
- Roller Width: 300 mm
- Ø Top Roller: 80 mm
- Ø Bottom Roller: 80 mm
- Table Width: 300 mm
- Table Length: 700 mm
- Weight: approx. 25 kg
- Surface Pressure: approx. 1.000 kg
- Clearance Height: approx. 24 mm
- DIN Formats: ≤ DIN A
- Footprint: 36 cm x 46,5 cm
Matching Printing Felts
Art. No.: 17701
approx. 29 cm x 90 x 5 mm, soft, white
Art. No.: 17801
approx. 29 cm x 90 x 3 mm, firm, mottled
Art. No.: 17035
- Roller Width: 350 mm
- Ø Top Roller: 80 mm
- Ø Bottom Roller: 80 mm
- Table Width: 350 mm
- Table Length: 700 mm
- Weight: approx. 27 kg
- Surface Pressure: approx. 1.000 kg
- Clearance Height: approx. 24 mm
- DIN Formats: ≤ DIN A
- Footprint: 41 cm x 46,5 cm
Matching Printing Felts
Art. No.: 17702
approx. 34 cm x 90 x 5 mm, soft, white
Art. No.: 17802
approx. 34 cm x 90 x 3 mm, hard, mottled
Art. No.: 17040
- Roller Width: 400 mm
- Ø Top Roller: 80 mm
- Ø Bottom Roller: 80 mm
- Table Width: 400 mm
- Table Length: 700 mm
- Weight: ca. 30 kg
- Surface Pressure: approx. 1.000 kg
- Clearance Height: ca. 24 mm
- DIN Formats: ≤ DIN A
- Footprint: 46 cm x 46,5 cm
Matching Printing Felts
Art. No.: 17703
approx. 39 cm x 90 x 5 mm, soft, white
Art. No.: 17803
approx. 39 cm x 90 x 3 mm, hard, mottled
Art. No.: 17050
- Roller Width: 500 mm
- Ø Top Roller: 80 mm
- Ø Bottom Roller: 80 mm
- Table Width: 300 mm
- Table Length: 700 mm
- Weight: approx. 34 kg
- Surface Pressure: approx. 1.000 kg
- Clearance Height: approx. 24 mm
- DIN Formats: ≤ DIN A
- Footprint: 56 cm x 46,5 cm
Matching Printing Felts
Art. No.: 17704
approx. 49 cm x 90 x 5 mm, soft, white
Art. No.: 17804
approx. 49 cm x 90 x 3 mm, hard, mottled
Art. No.: 17060
- Roller Width: 600 mm
- Ø Top Roller: 80 mm
- Ø Bottom Roller: 80 mm
- Table Width: 600 mm
- Table Length: 900 mm
- Weight: approx. 45 kg
- Surface Pressure: approx. 1.000 kg
- Clearance Height: approx. 24 mm
- DIN Formats: ≤ DIN A
- Footprint: 66 cm x 46,5 cm
Matching Printing Felts
Art. No.: 17705
approx. 59 cm x 90 x 5 mm, soft, white
Art. No.: 17805
approx. 59 cm x 90 x 3 mm, hard, mottled
Printing presses with new planetary gearbox for linocuts, woodcuts, etchings and intaglio printing. In solid design with strong cast aluminium frame. Both, upper and lower stell rollers are of 80 mm diameter what one not often find. The printing pressure can be adjusted on both sides via star handles. It is driven by a four-spoke handwheel via a new type of planetary gear with a reduction ratio of 3:1 for easier working. The printing table or plate, made of multiplex with screwed-on, electrolytic galvanized steel plate, moves by means of friction between the rollers in the straightening in which the hand-wheel is turned. Specially coated strips on the side panels provide friction-freeminimized leading.
Compressive Force: approx. 1.000 kg, Clearance Height approx. 24mm (up to 40 mm possible)
Art. No.: 17230
- Roller Width: 300 mm
- Ø Top Roller: 80 mm
- Ø Bottom Roller: 80 mm
- Table Width: 300 mm
- Table Length: 700 mm
- Weight: approx. 25 kg
- Surface Pressure: approx. 1.000 kg
- Clearance Height: approx. 24 mm
- DIN Formats: ≤ DIN A
- Footprint: 36 cm x 46,5 cm
Matching Printing Felts
Art. No.: 17701
approx. 29 cm x 90 x 5 mm, soft, white
Art. No.: 17801
approx. 29 cm x 90 x 3 mm, hard, mottled
Art. No.: 17235
- Roller Width: 350 mm
- Ø Top Roller: 80 mm
- Ø Bottom Roller: 80 mm
- Table Width 350 mm
- Table Length: 700 mm
- Weight: approx. 27 kg
- Surface Pressure: approx. 1.000 kg
- Clearance Height: approx. 24 mm
- DIN Formats: ≤ DIN A
- Footprint: 41 cm x 46,5 cm
Matching Printing Felts
Art. No.: 17702
approx. 34 cm x 90 x 5 mm, soft, white
Art. No.: 17802
approx. 34 cm x 90 x 3 mm, hard mottled
Art. No.: 17240
- Roller Width: 400 mm
- Ø Top Roller: 80 mm
- Ø Bottom Roller: 80 mm
- Table Width: 400 mm
- Table Length: 700 mm
- Weight: approx. 30 kg
- Surface Pressure: approx. 1.000 kg
- Clearance Height: approx. 24 mm
- DIN Formats: ≤ DIN A
- Footprint: 46 cm x 46,5 cm
Matching Printing Felts
Art. No.: 17703
approx. 39 cm x 90 x 5 mm, soft, white
Art. No.: 17803
approx. 39 cm x 90 x 3 mm, hard, mottled
Art. No.: 17250
- Roller Width: 500 mm
- Ø Top Roller: 80 mm
- Ø Bottom Roller: 80 mm
- Table Width: 300 mm
- Table Length: 700 mm
- Weight: approx. 34 kg
- Surface Pressure: approx. 1.000 kg
- Clearance Height: approx. 24 mm
- DIN Formats: ≤ DIN A
- Footprint: 56 cm x 46,5 cm
Matching Printing Felts
Art. No.: 17704
approx. 49 cm x 90 x 5 mm, soft, white
Art. No.: 17804
approx. 49 cm x 90 x 3 mm, hard, mottled
Art. No.: 17360
- Roller Width: 600 mm
- Ø Top Roller: 80 mm
- Ø Bottom Roller: 80 mm
- Table Width: 600 mm
- Table Length: 900 mm
- Weight: approx. 45 kg
- Surface Pressure: approx. 1.000 kg
- Clearance Height: approx. 24 mm
- DIN Formats: ≤ DIN A
- Foorprint: 66 cm x 46,5 cm
Matching Printing Felts
Art. No.: 17705
approx. 59 cm x 90 x 5 mm, soft, white
Art. No.: 17805
approx. 59 cm x 90 x 3 mm, hard, mottled
The demand for a printing press where the printing plate moves without pressure of the upper roller gave us the idea to produce this kind of new presses. Significant for this press is that the printing table is driven by the lower roller through two cogs which makes the printing plate move by two tooth racks. So you are able to print not only Lino prints, etchings or woodcuts with this press you can allthough print printings which are sensitive for pressure like corrugated board printings, Styrene printings etc. The body of the press is made of strong aluminium cast. The upper and lower roller diameter is 80mm what is important in comparision with other presses. The opening and the pressure can be adjusted with two screw handles which work on the upper roller.
For an easy movement of the printing plate by turning the four spoked wheel the lower roller has a planetary reduction gear, ratio of 3:1. The same printing plate with two mounted tooth racks is driven by two cogs mounted on both sides of the lower roller. The printing plate is made of a 15mm strong multiplex plate covered by a 2.5mm thick zink coated steel plate. Four bearings lead the printing plate. The presses are available in three different sizes. Each press comes with a felt sheet for printing.
Compressive Force: approx. 2.500 kg, Clearance Height approx. 24mm (up to 40 mm possible)
Art. No.: 17260
- Roller Width: 400 mm
- Ø Top Roller 80 mm
- Ø Bottom Roller: 80 mm
- Table Width: 400 mm
- Table Length: 700 mm
- Weight: approx. 35 kg
- Surface Pressure: approx. 2.500 kg
- Clearance Height: approx. 24 mm
- DIN Formats: ≤ DIN A
- Foorprint: 46 cm x 46,5 cm
Matching Printing Felts
Art. No.: 17703
approx. 39 cm x 90 x 5 mm, soft, white
Art. No.: 17803
approx. 39 cm x 90 x 3 mm, hard, mottled
Art. No.: 17270
- Roller Width: 500 mm
- Ø Top Roller: 80 mm
- Ø Bottom Roller: 80 mm
- Table Width 500 mm
- Table Length: 700 mm
- Weight: approx. 41 kg
- Surface Pressure: approx. 2.500 kg
- Clearance Height: approx. 24 mm
- DIN Formats: ≤ DIN A
- Foorprint: 56 cm x 46,5 cm
Matching Printing Felts
Art. No.: 17704
approx. 49 cm x 90 x 5 mm, soft, white
Art. No.: 17804
approx. 49 cm x 90 x 3 mm, hard, mottled
Art. No.: 17280
- Roller Width: 500 mm
- Ø Top Roller: 80 mm
- Ø Bottom Roller: 80 mm
- Table Width: 500 mm
- Table Length: 900 mm
- Weight: approx. 44 kg
- Surface Pressure: approx. 2.500 kg
- Clearance Height: approx. 24 mm
- DIN Formats: ≤ DIN A
- Foorprint: 56 cm x 46,5 cm
Matching Printing Felts
Art. No: 17704
approx. 49 cm x 90 x 5 mm, soft, white
Art. No: 17804
approx. 49 cm x 90 x 3 mm, hard, mottled
Handlever Printing Presses
These presses are designed for lightweight, simple block printing techniques, especially Linoleum and Woodcut. The special designed handle generate like a lever arm the pressure on the plate. Different thickness of the printing plate is possible by a changable fixing of the pressure plate at two different places and by using washer plates. There are two different sizes available.
Art. No: 17330
- Printing Block Thickness: 0 – 30 mm
- Maximum press force: 40,0 kg
- Printing Size: 21 cm x 30 cm (8,2″ x 11,8″; DIN A4)
- Size: 42 cm x 30 cm x 20 cm
- Weight: 6,7 kg
- Barcode EAN13: 4022505 173009
Art. No.: 17310
- Printing Block Thickness: 0 – 30 mm
- Maximum press force: 40,0 kg
- Printing Size: 30,5 cm x 30,5 cm (12″ x 12″)
- Size: 46 cm x 31 cm x 20 cm
- Weight: 8,0 kg
- Barcode EAN13: 4022505 173009
Accessories
Available individually or as replacement:
Printing Tables:
- Art. No: 17632
- 30 cm x 70 cm
- Art. No.: 17635
- 35 cm x 70 cm
- Art. No.: 17642
- 40 cm x 70 cm
- 40 cm x 70 cm
- Art. No.: 17651
- 50 cm x 70 cm
- 50 cm x 70 cm
- Art. No.: 17652
- 50 cm x 90 cm
- 50 cm x 90 cm
- Art. No.: 17662
- 60 cm x 90 cm
- 60 cm x 90 cm
Planetary gearbox, 3:1 reduction ratio for retrofitting for less effort when printing:
- Art. No: 17001
